Reports shelf · a complete physics lab, annotated

Physics Lab Report Example: a full pendulum lab, annotated by section

Below sits a complete physics lab report example — five sections of an illustrative lab on an invented experiment (how the length of a pendulum's string changes its period) — with grader notes on every section naming what the marker checks there. Read the tabs in order to watch a finished lab earn its method marks, then match your assignment sheet to a format and jot a one-line plan for each section. Everything runs in your browser; nothing you type leaves your device.

Last updated: November 9, 2026
0sections annotated
0grader notes
0lab formats to match
0%in-browser

A physics lab report example teaches fastest when it arrives annotated: the full lab, section by section, with notes on what the grader checks in each part. This page walks through all five sections of an illustrative physics lab — title and aim, apparatus, procedure, data and analysis, conclusion — then helps you match the format your sheet wants before you draft yours.

Honesty note: the lab on this page tests an invented question — how string length changes a pendulum's period — and every number in it (0.20–1.00 m, 15.5 seconds, 9.75 m/s²) is made up for teaching, the same illustrative tradition as the lab report example for general labs. Quoting it in a submission fails twice: as plagiarism, and as data for an experiment you never ran. Your lab must report the experiment you actually did. For a fill-in frame with an error calculator, the physics lab report builder owns structure; for the generic IMRaD process, the how to write a lab report guide owns the steps.

The annotated walkthrough: a complete example in five tabs

Reading a finished physics lab beats reading advice about labs, for one plain reason: you can finally see how much of the grade is mechanics. Physics graders award method marks for things students skip in a rush — the precision next to an instrument, a repeated reading written down raw, units on every axis of the graph. The walkthrough below puts a finished lab in front of you five sections at a time, each with four grader notes naming exactly what the marker hunts for there.

The tabs read in the order the grader reads: the aim announces a testable hypothesis, the apparatus and procedure make the experiment repeatable by a stranger, the data and analysis turn a table of raw times into a gradient, and the conclusion answers the aim with the number that gradient produced. Jump straight to the section you are stuck on instead — the walkthrough remembers nothing between visits.

The annotated walkthrough

100% private — runs in your browser

Section 1 · Title & Aim

How String Length Affects the Period of a Pendulum

Prepared by: [your name] — Course: Physics 101 — Date: [submission date]
Experiment type: oscillation investigation — independent variable: string length (0.20–1.00 m); dependent variable: period T (s)

Aim: to find out how the length of a pendulum's string affects its period. Hypothesis: as the string gets longer, the period increases — a longer pendulum swings slower because the restoring force has a longer arc to act over, and theory predicts the period grows with the square root of the length.

  • Variables in the title line — length and period are both named, so the grader knows what was tested before reading a word of the lab. "Pendulum Experiment" makes them guess; this one never does.
  • The hypothesis carries a direction and a reason — longer means slower, with the restoring-force clause attached. A hypothesis that predicts only "an effect" cannot fail, and cannot be marked right.
  • The ranges ride along — 0.20–1.00 m in the byline tells the grader the plan was a spread, not two careless points. Ranges in the frame sections promise a plottable data table later.
  • Byline block carries course and date — and if your sheet wants partner names or a class period, they go here too. Check the sheet, not this example.

Section 2 · Apparatus

Retort stand with clamp; 1.20 m string; steel bob, 50 g (±0.5 g); metre rule, ±0.002 m; digital stopwatch, ±0.01 s display (human reaction about ±0.2 s); protractor; adhesive tape; graph paper or spreadsheet for plotting.

Safety note: the stand is weighted with a book bag so the swinging bob cannot pull it over; the swing area is cleared before timing starts.

  • Every instrument carries its precision — ±0.002 m on the rule, ±0.2 s on human timing. In physics the uncertainty is part of the apparatus, and its absence is where precision marks die.
  • The honest reaction time is stated — the stopwatch display reads ±0.01 s but the person pressing it adds ±0.2 s. Naming the bigger number is what the error analysis in the conclusion will stand on.
  • Only what was used — no photogate on the list if a thumb started and stopped the watch. The grader cross-checks this list against the procedure line by line.
  • Safety sits inside the section — the weighted stand and the cleared swing area, two lines. Physics graders read a lab that plans for a toppling stand as a lab planned by someone who has used one.

Section 3 · Procedure

1. Tie the bob to one end of the string and fix the other end in the clamp. 2. Measure the string length from the knot to the centre of the bob and record it — five lengths: 0.20, 0.40, 0.60, 0.80 and 1.00 m.

3. Pull the bob aside less than 10° and let go — small angles keep the timing honest. 4. Time 10 complete swings from "release" to the tenth return, and write the total down raw.

5. Repeat the timing three times at each length, resetting the swing between trials. 6. Keep the bob mass, the release angle and the same string for every trial — only the length changes.

7. Compute the period for each trial as T = time for 10 swings ÷ 10, then average the three trials at each length in the analysis, not here.

  • One action per numbered step — measuring stays separate from releasing, releasing from timing. Graders tick steps; mixed steps tick nothing.
  • Timed in tens — ten swings per reading shrinks the ±0.2 s reaction error to ±0.02 s per swing. Timing one swing is the classic physics mark-loser, and step 4 exists to avoid it.
  • Controlled variables are visible in the wording — same bob, same angle, same string, only the length changes. Change two things at once and the data cannot answer the question.
  • Averaging is deferred — the procedure stops at raw totals; step 7 sends the division to the analysis section. Raw values belong to Data; processing them belongs to Analysis, and each grader checks its own half.

Section 4 · Data & Analysis

Raw data (time for 10 swings, seconds): 0.20 m — 9.01, 8.98, 9.03; 0.40 m — 12.68, 12.72, 12.65; 0.60 m — 15.52, 15.48, 15.55; 0.80 m — 17.95, 17.99, 17.92; 1.00 m — 20.06, 20.10, 20.04.

Periods (mean of three trials): 0.90 s, 1.27 s, 1.55 s, 1.80 s, 2.01 s. Plotting T² against L gives a straight line from about 0.81 at 0.20 m to 4.04 at 1.00 m; the best-fit gradient is 4.05 s²/m.

Theory: T² = (4π²/g)·L, so the gradient equals 4π²/g. From the gradient, g = 4π² ÷ 4.05 ≈ 9.75 m/s². Against the accepted 9.81 m/s², the percent error is (9.81 − 9.75) ÷ 9.81 × 100 ≈ 0.6 percent.

  • Raw repeats survive — all three trials appear at every length, not just an average that arrived from nowhere. The grader recomputes the quoted means before believing them.
  • The graph linearizes — T against L curves; T² against L is a straight line, and a straight line has a gradient you can measure. Choosing the plotted quantity IS the analysis in this lab.
  • Units ride every number — seconds in the table, s²/m on the gradient, m/s² on g. A gradient without units is a number, not a physical quantity, and it earns the graph's marks only half-way.
  • The gradient becomes a measurement — 4π²/g on one side, 4.05 on the other, g out the end, percent error attached. The graph has stopped being a picture and started being evidence.

Section 5 · Conclusion

The experiment supports the hypothesis: as the string lengthened from 0.20 m to 1.00 m, the mean period grew from 0.90 s to 2.01 s, and the T²-against-L graph is a straight line as theory predicts. The gradient, 4.05 s²/m, gives g ≈ 9.75 m/s², about 0.6 percent below the accepted 9.81 m/s² — so the pendulum behaved like the theory says a pendulum behaves.

The measurement has honest weak spots. Human reaction time of about ±0.2 s was the biggest single error, partly tamed by timing 10 swings per reading; the string was measured to the centre of the bob, but the knot adds a millimetre or two of uncertainty to every length; and amplitude drifted as each swing died. A photogate would remove the reaction error, measuring to the knot's top would tighten the lengths, and testing the small-angle limit with a 25° release would show where the timing assumption starts to bend.

  • The aim gets answered with numbers — two lengths, two periods, one gradient, one g, one percent error, in order. A conclusion that says "longer is slower" without the numbers repeats the aim instead of finishing it.
  • Supported, not proven — one experiment on one bench supports a hypothesis; "proved" is a word the grader circles. The limits get named along with their effect on the result.
  • Every error earns a fix — reaction time, so a photogate; knot uncertainty, so measure from the top; decaying swing, so test the angle limit. Error analysis that names the repair, not just the sin, is where the last marks hide.
  • The 0.6 percent stays humble — the example never claims its g is the true g, only that the method measured close to it. Overclaiming from a classroom bench is the classic final-sentence mark-loser.

The example is invented, illustrative teaching material — experiment, lengths, times and gradient included — and it never saves to your browser; the format matcher below is the only thing this page remembers. Copy buttons export the illustrative text; swap every number for data from the experiment on your own bench before a draft goes anywhere near a submission portal.

One caution on the copy buttons: they exist because re-typing skeletons wastes time, not because the text is reusable. The honest workflow copies a section, deletes every sentence that carries a fact about the pendulum, and keeps only the connective shapes — the aim-then-hypothesis order, the precision-beside-instrument style, the one-action-per-step rhythm, the raw-repeats-then-gradient path. What survives is a scaffold the experiment you actually ran can pour into. To fill that scaffold slot by slot instead of tab by tab, the physics lab report builder turns the same five-section shape into editable boxes with word counters, and the lab report template offers the fill-in document version.

What graders score in each section

Different sheets split the marks differently, but the shape of the split barely moves: the data and the analysis carry the method marks, the conclusion carries the understanding marks, and the frame sections (title, aim, apparatus) punish carelessness more than they reward polish. The table reads the illustrative example against a typical physics rubric, with the most common mark-down for each section.

SectionIts one jobTypical share of wordsMost common mark-down
Title & AimName the experiment and both variables; state a testable hypothesis with its reason~5–10%A hypothesis that cannot fail, or no hypothesis at all
ApparatusList instruments with their precision, plus safetylist"A stopwatch and a ruler" — no uncertainties anywhere
ProcedureNumbered steps a stranger could repeat~15–20%Two actions in one step; controlled variables invisible
DataRaw readings with units and repeats, in a labelled table~10%Only averages recorded; raw trials lost
AnalysisGraph that linearizes, gradient interpreted, g or the target quantity computed~20–25%Curved plot nobody can read; units missing from axes
ConclusionAnswer the aim with numbers, evaluate, improve~10–15%"Proved" declared; errors named with no fix

Format Match: which lab format is your sheet asking for?

Not every physics lab wants the same skeleton, and a good chunk of every format mark is lost before the first sentence — by writing a standard five-parter into a sheet that asked for an APA-style formal report or a one-page short form. The matcher below fixes the skeleton first. Pick the format that matches your assignment: the standard classroom lab is the walkthrough's shape and the safe default; the APA-style formal adds a title page, an abstract, a cited introduction and a discussion, and splits data and results apart; the short-form one-pager compresses everything to five rows for labs graded on a single page. The section list under each format shows what goes in every part and what the grader checks there.

Then claim the lab as yours: each format shows four one-line plan boxes — introduction, summary, analysis, conclusion — where you write what your lab will do in that section, in one sentence each. The plans save to this browser, so a closed tab does not lose them; the format choice saves too. When the four lines read like a table of contents for a lab you could actually run, the skeleton has done its job, and the how to write a lab report planner is the next step if you want a word budget per section.

Format match

100% private — runs in your browser
My assignment is a
  • 1 · Titleframe

    Names the experiment and both variables; byline block carries course and date. Grader checks: variables, not decoration.

  • 2 · Aim & hypothesis~5–10%

    One sentence of aim, one testable directional hypothesis with its reason attached. Grader checks: the hypothesis can fail.

  • 3 · Apparatuslist

    Every instrument with its precision, plus a safety line. Grader checks: a stranger could rebuild the setup.

  • 4 · Procedure~15–20%

    Numbered imperative steps, one action each, controlled variables visible, repeats built in. Grader checks: one changed variable.

  • 5 · Data~10%

    Raw readings with units and repeats in a labelled table. Grader checks: raw values survive.

  • 6 · Analysis~20–25%

    The linearizing graph, gradient with units, target quantity computed. Grader checks: axes, units, best fit.

  • 7 · Conclusion~10–15%

    Answers the aim with the gradient's result, percent error, errors with fixes. Grader checks: supported, not proven.

Standard classroom selected — the walkthrough's shape, and the safe default when the sheet does not name a format.

One line: what is tested, both variables, and the direction you expect.

One line: the lengths, trials and timing plan that make it repeatable.

One line: the graph, the gradient and the quantity it measures.

One line: the verdict with numbers, one error, one fix.

Standard classroomformat matched
0 of 4sections with a plan (5+ words)
0words in your plans

Your format choice and the four plan lines save to this browser only — one storage key, csw-plre-v1. Picking a format saves immediately; typing saves after a short pause. Reopening the page restores both. Reset erases the key and returns the standard format with empty plans. The walkthrough, the grader-note toggles, the quiz and the poll are never stored.

The three formats, side by side

The signals live in your sheet's wording. "Aim, apparatus, conclusion" is the standard classroom lab. "Title page, abstract, references in APA" is the formal one. "One page" or "half a page" is the short form, and the fastest way to lose marks there is to hand in three pages of the standard skeleton. The grid shows where every element lands in each format:

ElementStandard classroomAPA-style formalShort-form one-pager
Title pageByline block under the titleDedicated APA 7 pageByline block, one line
AbstractNot required150–200 words, written lastNot required
Aim + hypothesisOwn section, 2 sentencesEnds the introduction, citedOwn row, 2 sentences
ApparatusOwn list with precisionSubhead in MethodFolded into the method steps
ProcedureNumbered steps, past or present tense per the sheetPast tense under MethodThree to five steps
DataRaw table, own sectionResults — tables and figuresShares a row with the graph
Graph & analysisLinearizing plot, gradient, target quantityResults hold the figure, Discussion reads itOne small plot beside the table
DiscussionFolded into the conclusionOwn section, ~20–25%One sentence inside the conclusion
ReferencesUsually noneAPA 7 list, hanging indentsUsually none

If your sheet turns out to want the APA-style formal report, the abstract row is the one students have never written before — the lab report abstract builder walks that 150–200 word form slot by slot, and the APA paper format guide covers the title page mechanics.

What makes a physics lab report different

Chemistry labs live on equations and biology labs on living material that scatters; physics graders add a third column to every row — measurement itself, with its uncertainty attached. Three habits separate physics reports from the generic kind, and all three are visible in the walkthrough above:

  • Uncertainty is a marking category of its own. Every instrument carries a precision — metre rule ±0.002 m, reaction time ±0.2 s — and the conclusion's error analysis stands on those numbers. A report that lists instruments bare reads as one that never thought about how wrong its answer might be. The physics lab report builder pairs its frame with a percent-error calculator for exactly this reason.
  • The graph is the analysis. In physics, plotting is not presentation — it is how the constant gets measured. Choosing T² against L instead of T against L is the single decision the whole analysis turns on, and the gradient of that line is the experiment's answer. A table without a graph is data; a graph with a gradient is evidence.
  • Constants are proven in the wording. "Same bob, same angle, same string" inside the procedure steps tells the grader the only moving part is the one under test. Claimed controls convince nobody; controls written into the steps do.

None of this changes the length math much. Your sheet's word budget is the law; where it gives none, the usual shape for a standard classroom lab at 600 words is roughly: aim 60, procedure 130, data 90 plus the table, analysis 140, conclusion 90, with the apparatus list on top. The free writing tools include a word counter that works section by section, so the analysis does not eat the conclusion by accident.

Five physics lab fails, and what the example does instead

Every fail below shows up in the walkthrough's notes; collected here so you can scan your own draft against them in five minutes:

  • Bare apparatus. "Stopwatch, ruler, stand" — no uncertainties, no bob mass. The example writes ±0.002 m and ±0.5 g beside every instrument, because error analysis starts in the apparatus list, not at the end.
  • Two variables changed at once. A heavier bob swapped in halfway through, so no conclusion is possible. The example holds mass, angle and string constant and changes only the length — and says so in the procedure wording itself.
  • Averages-only data. "The period was 1.55 s" with the three trials missing. The example records every raw total and divides later, because the grader recomputes means before believing them.
  • Graph sins. Dots joined dot-to-dot, no units on the axes, or a curved plot where a straight one exists. The example plots T² against L, draws one best-fit line, and reads the gradient off it with units attached.
  • "Proved" in the conclusion. One bench, five lengths, one afternoon — support, not proof. The example says "supports", names reaction time and the knot uncertainty, and attaches a fix to each — photogate, measure from the knot's top.

If the fails feel structural rather than cosmetic, go back a step: the lab report planner budgets words per section before drafting, and for the generic IMRaD version of this assignment — results section, discussion section, references — the general lab report example walks that shape tab by tab. Sister-subject flavour lives one click away too: the biology lab report example shows how the same skeleton bends when the material grows instead of swinging.

Seen the lab, stuck on yours?

Reading a finished example takes twenty minutes; writing yours takes the evening it usually does not have. If the draft will not close around your data — or the deadline is tomorrow and the graph is still a sketch on grid paper — a quoted, deadline-bound writer can turn your notes and your sheet into a submission-ready report. Your experiment, your data, your voice. The form below is the way to ask.

What this page cannot do

The honest limits, because a page that annotates graders should survive one:

  • It cannot measure your experiment. Every number on this page is invented. The habits transfer — precision, controlled variables, raw repeats, linearizing graphs — but not one datum. Your evidence comes from your bench, with real readings.
  • It does not know your sheet. Section names, order, abstract-or-not, citation style and the whole marking scheme vary by teacher. Where the sheet conflicts with the walkthrough or the matcher, the sheet wins every time.
  • The example is not a source. The experiment, the lengths and the times are illustrative teaching material. Nothing on this page should be cited, quoted or submitted — including the g ≈ 9.75 m/s², which is a number nobody measured.
  • The matcher plans, it does not write. Four one-line plans are a table of contents, not a draft. The mechanical checks it cannot do — counts, citations, readability — live in the free writing tools.
  • It will not grade you. For a self-audit before the teacher's score, the structure builder counts words per section and runs a percent-error check; this page shows what a strong lab looks like, not what yours currently earns.

Kept in its lane, the page does one thing well: it puts a plainly ordinary, properly proportioned physics lab in front of you with the grader's eye overlaid on every section, so the draft you write afterwards starts from a shape you have actually seen. The study guides hub holds the rest of the reports shelf.

Quiz: five calls from the grader's desk

Five questions on the decisions the walkthrough annotates — what the aim must contain, why timing ten swings beats timing one, which plot turns a curve into a gradient, what a mid-experiment bob swap costs, and where raw trials live. Every wrong answer reveals the right one, and four options keep the guessing honest.

1. What must the Aim section of a physics lab report contain?

A A list of the apparatus you plan to use
B A summary of the results you expect to get
C What you are testing — both variables named and a directional, testable hypothesis
D The teacher's marking scheme, restated in your own words

2. Why time 10 swings of the pendulum instead of one?

A The stopwatch refuses to record single swings
B One swing is too short for human reaction time — timing 10 and dividing spreads the same ±0.2 s error across ten swings
C Ten swings make the period larger and easier to measure
D Graders count how many numbers appear in the data table

3. Why plot T² against L instead of T against L?

A The graph looks tidier on graph paper
B Period cannot be measured directly, only squared
C The plot becomes a straight line whose gradient equals 4π²/g, so the slope itself yields g
D It removes the need to record raw data

4. Your partner swaps in a heavier bob halfway through the trials. What is wrong from a grader's point of view?

A Nothing — bob mass is the dependent variable anyway
B Only the conclusion needs rewording, nothing else
C Heavier bobs always swing slower, so the data is useless either way
D A second variable changed along with the length — the length effect can no longer be isolated

5. Your three 10-swing totals at 0.60 m read 15.52, 15.48 and 15.55 seconds. Where do these numbers belong?

A In the Aim, as the target timing
B Nowhere — one reading per length is enough
C In the Apparatus list, as stopwatch specifications
D In Data as the raw repeat trials, then averaged into T in the Analysis

Frequently asked questions

What are the sections of a physics lab report?+

The five the walkthrough follows: title and aim with a testable hypothesis, apparatus with instrument precision, procedure with controlled variables, data and analysis — table, graph, gradient — and a conclusion that answers the aim with the number it produced. Formal courses often ask for the APA-style version instead — title page, abstract, introduction with citations, method, results, discussion and references — and some sheets compress everything into a one-page short form. Match the skeleton to the sheet; the format matcher on this page re-draws the section list for all three.

Can I copy this physics lab report example into my own report?+

No, for two reasons that stack. The data on this page is invented for teaching — nobody actually swung that bob at those five lengths and stopped a stopwatch at exactly those times — so a copied lab reports measurements that never happened, which is fabrication on top of the plagiarism. What transfers is structure: the aim-hypothesis pairing, instrument precision in the apparatus list, one action per procedure step, raw repeats surviving into the data table, the straight-line graph with units on both axes, and the conclusion that answers the aim with its gradient.

How do you calculate percent error in a physics lab?+

Take the absolute difference between your measured value and the accepted one, divide by the accepted value, multiply by 100. In the example lab the gradient of the T-squared-against-L line is 4.05, so g works out near 9.75 m/s²; against the accepted 9.81 the percent error is about 0.6 percent. A percent error on its own earns little — attach the two biggest causes and one fix each, which is what the example's conclusion does.

Why does a physics lab report need a graph?+

Because the right graph turns a curve into a measurement. Period against length gives a curve nobody can read a constant off; T² against length gives a straight line whose gradient equals 4π²/g, so the slope itself becomes the answer. Graders look for labelled axes with units, a best-fit line rather than dots joined dot-to-dot, and most points sitting close to it — three habits the example's analysis tab demonstrates.

Does this page save what I type?+

Almost nothing. The walkthrough, the grader-note toggles, the quiz and the poll are scratch and never stored. The format matcher saves one local storage key in this browser, csw-plre-v1: which format you selected and up to four one-line section plans of 300 characters each, so a closed tab does not lose your plan. Reset erases the key and returns the standard format with empty plans. Nothing leaves the device — there is no account and no server copy.

A read example wants a frame to land in. The physics lab report builder turns the matcher's four plan lines into a drafting frame with word counters and an error calculator, the lab report template offers the same five sections as a fill-in document, and the whole shelf — labs, book reports, format guides — stays one click away on the study guides hub. Read the example, match the format, run the experiment, report it honestly.

Did the annotated lab make the method marks click?